Seca 955 - Switching off the Device; Other Functions (Menu); Navigating in the Menu

18 •
17-10-07-602-002d_10-2019S
To switch back to weighing range 1 proceed as follows:
► Remove all loads on the scales.
Weighing range 1 is activated again.
Switching off the device
► Press the ON/OFF key.
NOTE
In rechargeable battery operation, the scale switches off after a short
time if there is no load on it.
5.2 Other functions (menu)
Other functions are available in the menu of the device. This allows you to
configure the scales perfectly to your own needs.
Navigating in the menu 1. Switch on the scale.
2. Hold down the arrow key bmi/menu until the menu is called up.
The last menu item selected is shown in the display (here: Autohold
“AHOLd”).
3. Keep pressing one of the arrow keys until the required menu item appears
in the display (here: attenuation “FIL”).
Reset
Autohold
• On
• Off
Fil
• 0
• 1
• 2
Beep
• On
• Off
• On
• Off
Press
Hold
PT Weight
PT
Net Weight
• On
• Off
Autoclear
tare