Safety information • 5
English
17-10-07-602-002d_10-2019S
Preventing electric shock WARNING!
Electric shock
►
Set up the device so that the power supply socket is easy to reach
and the device can be disconnected from the power supply quickly.
► Ensure that your local power supply matches the information on the
power supply unit.
► Do not touch the power supply unit with wet hands.
► Do not use extension cables or power strips.
► Make sure that cables are not pinched or damaged by sharp edges.
► Make sure that cables do not come into contact with hot objects.
► Do not operate the device at an altitude of more than 3000 m above
sea level.
Preventing injuries and infections NOTICE!
Incorrect measurement due to force shunts
If accessories (e.g. power supply pouch) or pieces of clothing become
trapped between the seat and the base frame, the weight will not be
measured correctly.
If the patient's feet are not on the footrests, the weight measurement
will be incorrect.
► Ensure that there are no objects between the seat and the base
frame.
► Ensure that the armrests are folded down during the weighing pro-
cess.
► Make sure that the patient's feet are placed on the footrests during
the weighing process.
WARNING!
Risk of infection
►
Before and after every measurement, wash your hands to reduce
the risk of cross-contamination and nosocomial infections.
► Hygienically reprocess the device regularly as described in the
respective section in this document.
► Make sure that the patient has no infectious diseases.
► Make sure that the patient has no open wounds or infectious skin
alterations, which may come into contact with the device.
To Next Page
Loading...
