EasyManua.ls Logo

SECOP P Series - DLV;NLV Compressor Service and Brazing

SECOP P Series
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45
24.
DLV COMPRESSORS
2/2 DES.I.300.Z2.02 / 520N1265 December 2017
Secop accepts no responsibility for possible errors in catalogs, brochures, and other printed material. Secop reserves the right to alter its products without notice. This also applies to products already
on order provided that such alterations can be made without subsequential changes being necessary to specications already agreed. All trademarks in this material are the property of the respective
companies. Secop and the Secop logotype are trademarks of Secop GmbH. All rights reserved. www.secop.com
Instructions
DLV Compressors
100-127V 50/60Hz
105N446x
Series Controllers
Airow 3 m/s
Operating conditions 105N4460 + 5 °C to 43 °C - humidity < 90 % rH non condensing
Storage conditions -25 °C to 70 °C - humidity < 90 % rH non condensing
Supply voltage 100-127 V (± 10 %)
Frequency 50/60 Hz
Input power rating 450 W
Service/Repair R290 Brazing on Suction Connectors (Direct Intake)
Refer to Product Bulletin: Brazing on Suction Connectors
(Compressors with Direct Suction Intake)

Table of Contents