Do you have a question about the SECOP P Series and is the answer not in the manual?
Category | Compressor |
---|---|
Model | P Series |
Application | Commercial Refrigeration |
Refrigerant | R134a, R404A, R507, R290 |
Voltage | 115V |
Frequency | 50/60 Hz |
Specifies the compressor series covered by this mounting guideline.
Details type labels and explains designation codes for various compressor series.
Covers winding protector issues, PTC interaction, and resistance checks.
Safety precautions and guidelines for handling flammable refrigerants.
Identifies connectors and covers expanding/bending for tube fitting.
Guidelines, methods, and requirements for brazing connections.
Instructions for brazing on suction and discharge connectors.
Details LST (RSIR/RSCR) and HST (CSIR/CSR) starting devices.
Information on controllers and wiring for XV series compressors.
Instructions for service and repair of XV compressors.
Service instructions including R290 handling and brazing for DLV/NLV.
Diagrams showing electrical connections for DLV and NLV compressors.
Details on adapter plates, brazing, and service for Delta compressors.
Service and repair instructions for Kappa compressors.
Information on vacuum pumps and evacuation procedures.
Table listing maximum refrigerant charge for various compressor types.
Procedures for testing system tightness and compressor operation.
Lists mounting accessories and provides visual guidance.