ST-HDoC / ST-HDoC-MM
20
Press the key with single clicks, to search for PTZ ID one address at a time. When the ID is
discovered, the PTZ camera will stop panning.
Manual address search: Press or to search the address gradually, the image will flash
when the address is found. Press the direction control button to adjust the Speed Dome
Camera. Press the button to quit.
3.3.6 CVI camera test
Connect a CVI camera to the ST-HDoC’s “AHD, CVI, TVI” interface.
Press the key to enter the tester’s main menu, then press the keys to select CVI. Press
the key to enter CVI test.
PTZ control (over coaxial cable, if the camera is equipped):
Press key to open the menu, then press key to switch the control between coaxial
control (UTC) and RS485 control.
PTZ control instructions, please refer to “3.3.1 PTZ control”
To Next Page
Loading...
Need help?
General