ST-HDoC / ST-HDoC-MM
5
2.3.8 PTZ controller
Test the PTZ control command data to diagnose any errors or to ensure there is a sufficient
RS485/RS232 data transmission. The unit receives the control protocol code (PELCO-D, etc.) from a
PTZ keyboard or a DVR with a RS485/RS232 interface.
The unit will display 16 hexadecimal codes such as:
PELCO-P：A0 00（Add） xx xxxxxx AF xx
PELCO-D：FF 01（Add）xx xxxxxxxx
2.3.9 PTZ address scanning
Search the ID/ Protocol/ Baudrate of a PTZ camera being tested.
2.3.10 CVI camera test
This displays an HD CVI camera image. It supports 720p @ 25/30/50/60fps & 1080p @ 25/30fps. The
features are live video and coaxial PTZ control including calling up the camera’s OSD menu.
2.3.11 TVI camera test
This displays an HD TVI camera image. It supports 720p @ 25/30/50/60fps & 1080p @ 25/30fps. The
features are live video and coaxial PTZ control including calling up the camera’s OSD menu.
2.3.12 AHD camera test
This displays an HD TVI camera image. It supports 720p @ 25/30fps & 1080p @ 25/30fps. The
features are live video and coaxial PTZ control including calling up the camera’s OSD menu.
2.3.13 SDI camera test (ST-HDoC-MM only)
This displays an HD SDI camera image. It supports 720p @ 25/30fps & 1080p @ 25/30fps. The
features are live video and coaxial PTZ control including calling up the camera’s OSD menu.
To Next Page
Loading...