Secutron MR-2300 Series User Manual

66
Configuration
11.6 Set Password (Command-Menu)
11.7 View Event Log (Command-Menu)
The event log looks the same as the normal event queue. Pressing the INFO button has the
same effect that it does in the event queue. The illustration below provides an example of how
the INFO button works.
Figure 35 The event log
There are a maximum of 200 recent events saved in the event log. If the number of events
goes beyond 200, the oldest event is overwritten by the most recent one.
Note: Refer to section 11.2.1 on page 55 for detailed instructions on making menu
selections.
If the passcode does not match, the
following message appears and the
system exit to the main menu
If the passcode is OK the following
message appears and exits to the main
menu
1111 -> Default
Use this function to change the
passcode. The minimum number
of digits is 4 and the maximum
number is 10.
ONLY numeric digits are allowed.
i
Enter new passcode
[ ]
Re-enter passcode
[ ]
invalid passcode
Passcode updated
EAST LOBBY ENTRANCE
OPEN TRB 01/09
VERIFIED ALARM Z-01
2002/10/22 11:45.AM
ZONE
Message
EVENT
01 of 09
Process
Type
Physical
Zone No.
DATE
TIME
"INFO" Key
EVENT
type
ZONE
Message
EVENT
type
“INFO” KEY
Process
Type
Physical
Zone No.
Time

Secutron MR-2300 Series Specifications

General

Brand	Secutron
Model	MR-2300 Series
Category	Control Panel
Language	English