Secutron MR-2300 Series User Manual

73
Configuration
Command Menu-->Dialer-Config
11.11.3Report Options
Figure 46 Report Options menu
Command Menu/Dialer-Config/Telephone
Line
5.Number of retries
06 ->Default
Set the number of retries for both
line#1 and line#2. This function lets
the dialer retry on either line if it is
busy or not available. If the retry
count expires, the panel reports a
line trouble.
Note: Refer to section 11.2.1 on page 55 for detailed instructions on making menu
selections.
Command Menu/Dialer-Config/Report Options
1.Alarm priority
[X] Account 1->Def
[ ] Account 2
Use this menu to set the
account priority for reporting
alarms. If the priority is set
for account#1 then the dialer
will try account#1 first for
reporting.
Command Menu/Dialer-Config/Report Options
2.Trouble priority
[X] Account 1->Def
[ ] Account 2
Use this menu to set the
account priority for reporting
trouble. If the priority is set
for account#1 then the dialer
will try account#1 first for
reporting.
Command Menu/Dialer-Config/Report Options
3.Supervisory priority
[X] Account 1->Def
[ ] Account 2
Use this function to set the
account priority for reporting
supervisory troubles. If the
priority is set for account#1
then the dialer will try
account#1 first for reporting.
Number of Retries:
06
i
- Report Options -
1 Alarm Prio.
2 Trouble Prio.
3 Supv. Prio.
4 Aux Dis Report
5 Operation Mode
Alarm Priority:
[X] Account 1
Trouble Priority:
[X] Account 1
SUPV Priority
[X] Account 1

Secutron MR-2300 Series Specifications

General

Brand	Secutron
Model	MR-2300 Series
Category	Control Panel
Language	English