Secutron MR-2300 Series User Manual

78
Configuration
11.13 Bypass Det Ckt (Command-Menu)
11.14 Bypass NAC Ckt (Command-Menu)
The line passed the test; everything is OK.
Note: Refer to section 11.2.1 on page 55 for detailed instructions on making menu
selections.
Initiating zones may be bypassed individually. This
bypass command will allow you to scroll through all
initiating zones 1 to a maximum of 12 depending on the
size of the panel.
Press Enter to bypass the zone or scroll up or down to
un-bypassed (normal connected circuit).
Press Enter to un-bypass the zone or scroll up or down
to bypass (off normal unconnected circuit).
Indicating zones may be bypassed individually. This
bypass command will allow you to scroll through all
indicating zones 1 to a maximum of 4 depending on the
size of the panel.
Press Enter to bypass the zone or scroll up or down to
un-bypassed (normal connected circuit).
Press Enter to un-bypass the zone or scroll up or down
to bypass (off normal unconnected circuit).
Passed: Manual test
i
Bypass Det Zone
1.Zone-1
[ ]Bypassed
[ ]Un-Bypassed
Bypass Det Zone
1.Zone-1
NAC
[ ]Bypassed
[ ]Un-Bypassed

Secutron MR-2300 Series Specifications

General

Brand	Secutron
Model	MR-2300 Series
Category	Control Panel
Language	English