What to do if my Secutron MR-2300T shows a Battery Trouble?
If your Secutron Control Panel indicates a Battery Trouble, it might be due to low voltage (below 20.4 V). First, check that the batteries are present and in good condition. If the trouble persists, replace the batteries as soon as possible.
Why does my Secutron MR-2300T display a Common Trouble?
A Common Trouble on your Secutron Control Panel might indicate missing interconnection wiring, a missing module that was part of the configuration, or improperly secured cabling. Check these elements to resolve the issue.
How to fix Ground Fault on Secutron Control Panel?
To fix a Ground Fault on your Secutron Control Panel, check for any external wiring touching the chassis or other Earth Ground connection.
What to do if Secutron MR-2300T shows Circuit Trouble?
If your Secutron Control Panel is displaying a Circuit Trouble, check for open wiring on the affected circuit loop. Also, ensure the circuit isn't disconnected or bypassed.
What does Remote Fail mean on Secutron MR-2300T Control Panel?
If your Secutron Control Panel shows a Remote Fail, check for any failure reported by a remote annunciator or any other remote device, or a failure to communicate with it.
General| Voltage | 24V DC |
|---|---|
| Battery Capacity | 7Ah |
| Output Voltage | 24V DC |
| Material | Steel |
| Mounting Type | Wall Mount |
| Input Voltage | 120V AC |
| Operating Temperature | 0°C to 49°C |
| Dimensions | 14.5 x 12.5 x 3.5 inches |
To Next Page
