Secutron MR-2300 Series User Manual

71
Configuration
Command Menu/Dialer Config/Account Info
1.Account# 1 Identification
123456->Default
Use this menu to set the Account
ID for the monitoring station to
which the dialer reports events.
The maximum # of digits allowed is
six. For contact ID, only the first
four digits are used; the last two
are truncated.
Unless you are using the SIA
protocol, the allowed digits for the
account ID are simple digits 0 to 9
and hexadecimal digits A to F (the
SIA protocol only allows digits 0 to
9).
To enter hexadecimal digits, press
the INFO button. The letter “A” will
appear. To scroll through the rest of
the letters, press INFO repeatedly.
Press # to move the cursor to the
right or press * to move it to the left.
Command Menu/Dialer Config/Account Info
2.Account#1 Telephone Number
[ 101 ]->Default
Use this menu to set the telephone
number of the monitoring station.
The maximum # of digits allowed is
19 including “,” and numerals. The
“,” will be treated as 1 sec delay. To
enter “,” press the INFO button.
Press # to move the cursor to the
right or press * to move it to the left.
An example of a typical telephone
# is 9,,12345678.
Command Menu/Dialer Config/Account Info
3.Account#1 Reporting Format
[X] CONTACT ID-Def
[ ] SIA 300 Baud
[ ] SIA 110 Baud
Set the reporting format that is
recognized or preferred by the
monitoring station.
Command Menu/Dialer Config/Account Info
4. Account# 2 Identification
654321->Default Same as Account#1.
Command Menu/Dialer Config/Account Info
5.Account# 2 Telephone Number
[ 101 ]->Default Same as Account#1.
Account#1 ID:
_
Account#1 Telnum:
_
ACCNT#1 Format:
[X] Contact ID
Account#2 ID:
_
Account#2 Telnum:
_

Secutron MR-2300 Series Specifications

General

Brand	Secutron
Model	MR-2300 Series
Category	Control Panel
Language	English