What to do if Secutron MR-2312-DDR shows Battery Trouble?
If your Secutron Control Panel indicates a Battery Trouble, it's likely due to low voltage (below 20.4 V). The suggested solution is to replace the batteries as soon as possible.
What to do if Secutron MR-2312-DDR shows Ground Fault?
If your Secutron Control Panel is showing a Ground Fault, inspect for any external wiring that might be touching the chassis or any other earth ground connection.
How to fix Circuit Trouble on Secutron MR-2312-DDR Control Panel?
To address a Circuit Trouble issue on your Secutron Control Panel, check for open wiring on the affected circuit, and ensure the circuit is not disconnected or bypassed.
What to do if Secutron MR-2312-DDR reports Remote Fail?
If your Secutron Control Panel reports a Remote Fail, check for any failure reported by, or failure to communicate with a remote annunciator or other remote device.
How to fix ground fault on Secutron MR-2312-DDR Control Panel?
To address a ground fault in your Secutron Control Panel, check for any external wiring that might be touching the chassis or any other Earth Ground connection.
General| Brand | Secutron |
|---|---|
| Model | MR-2312-DDR |
| Category | Control Panel |
| Language | English |
To Next Page
