Secutron MR-2312-DDR User Manual

76
Configuration
Command Menu-->Dialer-Config
Ring Detect
11.12 Test Dialer (Command-Menu)
[ ] Disabled
[ ] 1
[ ] 2
[ ] 3
[ ] 4
[X] 5->Default
[ ] 6
[ ] 7
[ ] 8
Use this menu item to select the
number of rings on which the
panel’s modem will answer. The
default number of rings is five. The
maximum number of rings you can
define is eight.
If you select the “Disabled” option,
the modem will be disabled and the
panel will not pick up the incoming
call.
Note: Refer to section 11.2.1 on page 55 for detailed instructions on making menu
selections.
Press Enter to test Line #1. Press Cancel to exit this
menu. For a description of test messages, see section
11.12.1 on the following page.
Press Enter to test Line #2. Press Cancel to exit this
menu. For a description of test messages, see section
11.12.1 on the following page.
This feature flushes all reportable events from the
buffer. Press Enter to reset the dialer. Press Cancel to
exit this menu.
[X]5
-Ring Detect Number-
-Dialer Test-
1. L#1 Manual test
2. L#2 Manual test
3. Reset Dialer
i
1.L#1 Manual test
2.L#2 Manual test
3 Reset Dialer
.

Secutron MR-2312-DDR Specifications

General

Brand	Secutron
Model	MR-2312-DDR
Category	Control Panel
Language	English