SED GPH-610R - Receiving a Group;Broadcast Call During a Group;Broadcast Call

SED GPH-610R User Manual
- 36 -
After viewing the alert tone message of a new
point-to-point call,
 Press to answer this call or
press to reject the call.
After the current call is rejected or the call ends
and if the previous group call or broadcast call
is not completed, you will automatically join the
previous group or broadcast call.
Note: If the wait for the new point-to-point call
message times out, the current call is regarded
as having ended. If the priority of the incoming
point-to-point call is at a high level, you will
automatically exit the current group call or end
the current broadcast call and return to the
standby mode to wait for the alert tone of this
point-to-point call. In this case, you can choose
to answer or reject this call. If the priority of the
ongoing group call or broadcast call is at a
certain level, you will not be able to answer the
point-to-point call.
Receiving a group/broadcast call during a
group/broadcast call
If you receive the alert tone for a new group call
or broadcast call while another is in progress,
you can
 Press to reject the new call
 Press to answer the new call.
Before answering the new call:
If you have the right to speak in the
previous group call, you will release the
uplink and exit that group call.
If you are a listener in the previous
ongoing group call, you will exit that
group call.
If you are a recipient of the previous
broadcast call, you will exit that broadcast
call.
If you are the initiator of the previous
broadcast call, you will close that call.
www.malux.se