SED GPH-610R User Manual

SED GPH-610R User Manual
- 72 -
press on the standby interface
to enter the sub-menu or press
to exit directly.
2) Down: This is the shortcut key for
Group Calls by default. Refer to the
method for setting the Up key.
3) Left: This is the shortcut key for
Messages by default. Refer to the
method for setting the Up key.
4) Right: This is the shortcut key for
Ongoing Calls by default. Refer to the
method for setting the Up key.
4 Default Set: This function can restore factory
settings. To perform the operation, enter your
password ("1234" by default), and then press
to go to Default Set. The following
operation options are displayed:
1) Restore Default: Restores factory
settings.
2) Phone Password: Enter the new
password, and press . Then enter the
new password again according to screen
prompts and press to confirm the
operation.
Note: Restart the handheld after restoring
factory settings. All data previously recorded in
the handheld, including the phonebook and
pictures, will be lost after you restore factory
settings. Therefore, back up your data first.
5 Speed Dial Set: You can set number keys 1
to 9 as different phone numbers. Enter
numbers 1 to 9 and press to call a
number in standby mode according to your
settings. You can select a number key, enter
the number input interface, input the phone
number or press to enter the phone
book to select one phone number, and press
to confirm the operation. The number key
list is returned. The phone number or contact
number is displayed behind the corresponding
number key.
6 Voicemail: You can set or edit your voicemail
number. To call your voicemail number, hold
the number key 1 on the standby interface.
www.malux.se

SED GPH-610R Specifications

General

Brand	SED
Model	GPH-610R
Category	Handsets
Language	English