SEDEMAC GC1100 User Manual

GC1100 SEDEMAC
Page | 29
Level 0
Level 1 (On
screen)
Level 2 (On screen) *
Parameters (On screen)
(DISCONN ON LLOP SW)
Pressure Switch Transient Time
(LLOP SW TRANS TIME)
0.0 – 3.0 sec
Crank Disconnect At Alt
Frequency
(DISCONN AT ALT FREQ)
10 – 70 Hz
Crank Disconnect At Engine
Speed
(DISCONN AT ENG SPEED)
150 – 4000 rpm
Disconnect On Charging Alt
Voltage
(DISCON ON CA VOLT)
Disable/Enable
Charging Alt Disconnect Volt
Threshold
(CHG ALT VOLT THRESH)
5.0 – 30.0 volt
Speed
Monitoring
(SPEED
MONITOR)
Engine Speed Sense Source
(SPEED SENSE SOURCE)
Magnetic Pickup/Alternator
Frequency
Flywheel Teeth
(FLYWHEEL TEETH)
1 – 300
Under-speed Shutdown
(UNDER SPEED SHUTDOWN)
Disable/Enable
Under-speed Threshold
(UNDER SPD THRESHOLD)
0 – 3600 rpm
Under-speed Delay
(UNDER SPD DELAY)
1 – 60 sec
Over-speed Threshold
(OVER SPD THRESHOLD)
700 – 4000 rpm
Over-speed Delay
(OVER SPEED DELAY)
1 – 20 sec
Gross Over-speed Threshold
(GROSS OS THRESHOLD)
100 – 200 %
Battery
Monitoring
(BATTERY
MONITOR)
Low Battery Voltage Action
(LOW VOLT ACTION)
None/Notification/Warning
/Electrical Trip/Shutdown
Low Battery Voltage Threshold
(LOW VOLT THRESHOLD)
8.0 – 31.0 volt
Low Battery Voltage Delay
(LOW VOLT DELAY)
5 – 1800 sec
High Battery Voltage Action
(HIGH VOLT ACTION)
None/Notification/Warning
/Electrical Trip/Shutdown
High Battery Voltage Threshold
(HIGH VOLT THRESHOLD)
9.0 – 32.0 volt
High Battery Voltage Delay
(HIGH VOLT DELAY)
5 – 1800 sec
Charging
Alternator
Charging Alternator Fail Action
(FAIL ACTION)
None/Notification/Warning
/Electrical Trip/Shutdown

SEDEMAC GC1100 Specifications

General

Brand	SEDEMAC
Model	GC1100
Category	Controller
Language	English