Indicates that radiator water level is below the pre-set
threshold
Shutdown/
Warning/
Electrical trip/
Notification
Auxiliary
Input/user
defined name
Configured auxiliary input has triggered longer than pre-
set duration
Shutdown/
Warning/
Electrical trip/
Notification
The oil pressure sensor is detected as not being present
Shutdown/
Warning/
Electrical trip/
Notification
The temperature sensor is detected as not being present
Shutdown/
Warning/
Electrical trip/
Notification
The fuel level sensor is detected as not being present
Shutdown/
Warning/
Electrical trip/
Notification
The fuel consumption has exceeded the pre-set
threshold
Configured as digital input has triggered longer than pre-
set duration or when the immediate shutdown is required
Indicates that genset has not stopped after sending Stop
command
Indicates that genset has not started after the pre-set
number of Start attempts
Indicates that genset L1(R) Phase voltage has exceeded
the pre-set over voltage threshold.
Indicates that genset L2(Y) Phase voltage has exceeded
the pre-set over voltage threshold
Indicates that genset L3(B) Phase voltage has exceeded
the pre-set over voltage threshold
Indicates that genset L1(R) Phase voltage has fallen
below pre-set under voltage threshold.
Indicates that genset L2(Y) Phase voltage has fallen
below pre-set under voltage threshold
Indicates that geset L3(B) Phase voltage has fallen
below pre-set under voltage threshold
Alternator phase sequence (R-Y-B) is not correct
Shutdown/
Warning/
Electrical trip/
Notification