3.1
Tool preparation for card brushing
⚫
1 Hardware tool: a computer PC
⚫
2 Hardware tools: a TF card reader (not necessary if the computer has a TF card socket).
⚫
3 Hardware: One TF card
(Note that the TF card has compatibility issues, if the H68K does not recognize the card,
you can ask the group for a link to buy it, or use the eMMC wire brush method)
⚫
4 Software tools: card writing tool [Win32DiskImager
(Other card writing tools are also available, such as balenaEtcher)
⚫
5 Software material: one case firmware package [OPxxx.img]
3.2
TF card swipe operation procedure
⚫
Step 1: Install the card writing tool
Put the TF c a
r d b u r n i n g tool-ImageWriter package into the C drive of your
computer and unzip it, then go to the folder and double click
[Win32DiskImager].
To Next Page
Loading...
Need help?
General