Seg WIC1 Reference Manual

Def. Autom. Reset Description
New Pickup or After 10 s Automatic Reset when a new protection trip occurs or after 10 seconds
Reset via »C« key
Select whether a reset via »C« key shall be password-protected.
Selection list referenced by the following parameters:
•
╚═▷ DiggiMEC . Reset via »C« key
•
Reset via »C« key Description
Without Password A reset via »C« key can be done without password query.
With Password A reset via »C« key requires entering the password.
Allow invalid addr.
Select the rule how the device shall handle the query for an invalid start address (or an
address range with internal “gaps”).
Selection list referenced by the following parameters:
• ╚═▷ Modbus . Allow invalid addr.•
Allow invalid addr. Description
Send an exception The device answers with an exception whenever the requested address range contains
an invalid address.
Inv. addr.are allowed The device accepts invalid addresses within the requested address range without
sending an exception.
Baud rate
Selection list referenced by the following parameters:
• ╚═▷ Modbus . Baud rate•
Baud rate Description
1200 1200
2400 2400
4800 4800
9600 9600
135WIC1WIC1-2.0-EN-REF
13 Selection Lists

Seg WIC1 Specifications

General

Brand	Seg
Model	WIC1
Category	Relays
Language	English