8
PRECAUTIONS REGARDING PRODUCT OPERATION
3
● To avoid injury, be sure to provide sufficient space by considering the crowd
situation at the installation location. Insufficient installation space can cause
customers to bump into each other, causing trouble.
● Every day when cleaning the Control Unit (Gun), inspect the gun and make
sure that there are no scratches or cracks in the surface, and that the fasten-
ing screws are not loose. If the game is played with scratches, cracks or loose
screws, it can cause injuries to the player or to people nearby.
● Do not put any heavy item on this product. Placing any heavy item on the
product can cause a falling down accident or parts damage.
● Do not climb on the product. Climbing on the product can cause falling down
accidents. To check the top portion of the product, use a step ladder.
● When using a stepladder or stool while working, do not hold onto the billboard
carrier (the round pipe section). Holding or hanging off this may bend it out of
shape or damage it, and could lead to a fall or an accident.
● To avoid electric shock, check to see if door & cover parts are damaged or
omitted.
● To avoid electric shock, short circuit and/or parts damage, do not put the fol-
lowing items on or in the periphery of the product.
[Flower vases, flowerpots, cups, water tanks, cosmetics, and receptacles/con-
tainers/vessels containing chemicals and water.]
To ensure customers enjoy playing the game, clean the Control Unit regularly. If
there is any dirt buildup, the trigger may not return properly after being pulled.
Ensure that the screws are not
loose and are all present.
Ensure that the casing is free of
scratches and cracks.
Ensure that the trigger is functioning properly.
To Next Page
Loading...
Need help?
General
