68
PROJECTOR
10
ADJUSTING THE SCREEN SIZE
10.6
● Although the on-screen size (H. SIZE, V. SIZE) has been adjusted at the time of
shipment from the factory, readjustment can be made if desired. When the
Game Board is replaced, readjustments may be necessary.
• When discontinuing the adjustment, choose EXIT from the menu at the stage of procedure 2 and press the SET button.
• To continue adjusting other menu items, repeat procedure 2-4.
• Unless the adjustment data is stored, the data in the adjusted status will be erased at the time the power is turned off and
the pre-adjustment status will remain when the power is turned on next time.
To Next Page
Loading...
Need help?
General
