What to do if Sega Arcade Game Machine displays 'System Memory Not Enough'?
If your Sega Arcade Game Machine displays 'System Memory Not Enough', send the LINDBERGH board in for repair with the key chip still in place.
What to do if Sega Arcade Game Machine displays 'Sound Card Not Found'?
If your Sega Arcade Game Machine displays 'Sound Card Not Found', send the LINDBERGH board in for repair with the key chip still in place.
What to do if Sega Arcade Game Machine displays 'Graphic Card Not Found'?
If your Sega Arcade Game Machine displays 'Graphic Card Not Found', send the LINDBERGH board in for repair with the key chip still in place.
What to do if Sega Arcade Game Machine displays 'Game Program Not Available'?
If your Sega Arcade Game Machine displays 'Game Program Not Available', send the LINDBERGH board in for repair with the key chip still in place.
What to do if Sega Arcade Game Machine displays 'Game Program Not Found on Server'?
If your Sega Arcade Game Machine displays 'Game Program Not Found on Server', check that the game title, place on the network server, and the key chip correspond to each other.
What to do if my Sega Arcade Game Machine Control Unit (Gun) does not appear to be operating correctly?
If the Control Unit (Gun) of your Sega Arcade Game Machine isn't working right, it could be due to: 1. A fault with the microswitches. 2. A fault with the LED board. 3. Speed sensor settings are wrong. 4. The sensor unit is broken. 5. The speed sensor circuit fuse has blown due to a momentary electrical overload. To fix this, use an Input Test to check the microswitches, check that the LEDs are on, use TEST Mode to correct the speed sensor settings, exchange the sensor unit, and after resolving the cause of the overload, change the fuse.
Why is my Sega Arcade Game Machine Control Unit (Gun) sighting unsatisfactory?
Unsatisfactory Control Unit (Gun) sighting in your Sega Arcade Game Machines can be due to several reasons: * Sights are not aligned due to changes in the surrounding environment. * LED board malfunctioning. * Sensor unit malfunctioning. * LED board and LED board cover are contaminated. * Fuse on the sensor unit has blown due to a momentary electrical overload. To resolve this, perform sighting adjustment in the test mode, check to ensure that the LED lights up (if it does not light up, replace), replace the sensor unit, wipe off soiled surfaces, and fix the source of the overload, then replace the fuse.
What to do if Sega Arcade Game Machine displays 'IP Address Not Assigned'?
If your Sega Arcade Game Machine displays 'IP Address Not Assigned', check the network settings to ensure they are correctly configured. Verify that the network cable is properly connected.
What to do if Sega Arcade Game Machine displays 'Server Mount Failed'?
If your Sega Arcade Game Machine displays 'Server Mount Failed', check the network settings, ensuring the IP address and other settings are correctly configured. Also, verify that the network cable is securely connected.
General| Game Title | The House of the Dead 4 |
|---|---|
| Screen Size | 29 inches |
| Genre | Light Gun Shooter |
| Release Year | 2005 |
| Category | Arcade Game Machines |
| Manufacturer | Sega |
| Monitor | CRT |
| Orientation | Horizontal |
| Players | 2 |
| Control | Light Gun |
| CPU | Sega Lindbergh |
| Model | The House Of The Dead 4 29"STD |
| Type | Arcade |
| Resolution | Standard Resolution |
| Cabinet | Upright |
Explains product stickers and warning labels for safety and identification.
Ensures safety by checking lighting, monitor, and machine stability before use.
Provides detailed instructions and warnings for assembling and installing the machine.
Introduces system and game test modes for diagnostics and settings.
Guides on gun calibration, speed settings, and game statistics management.
Step-by-step guide for replacing gun components like microswitches and sensors.
Lists common issues like no activation, incorrect screen color, and no sound.
Explains various error codes and their corresponding causes and solutions.
Step-by-step guide for removing and installing the main game board.
To Next Page