Sega The Maze of the Kings - Connection To The Power Supply

18
3.7.4. CONNECTION TO THE POWER SUPPLY
· This operation may only be carried out once the machine has been completely
assembled.
· Only QUALIFIED SERVICE PERSONNEL should carry out this operation.
Once the machine has been fully assembled and fixed in position it is ready to be connected to the power
supply
1. The socket outlet shall be installed near the
equipment and shall be easily accessible.
2. Insert the IEC plug into the IEC socket on the
cabinet.
3. Insert the mains cord into the wall outlet
4. Switch on the power at the wall outlet.
5. Switch on the mains switch on the AC unit of the
machine.