19
3.7.5. ASSEMBLY CHECK
· Only QUALIFIED SERVICE PERSONNEL should carry out this operation.
When the machine has been installed and power is applied, carry out the following checks in the TEST
MODE to ensure that the machine has been assembled correctly and that there are no faults.
Selecting the MEMORY TEST on the test mode
screen causes the on board memory to be tested
automatically. The game board is satisfactory if the
display beside each IC No. shows GOOD
The DIMM BOARD TEST checks the functionality of
the DIMM Board. The DIMM Board is satisfactory
when GOOD is displayed as shown.
In the TEST mode menu select CRT TEST to check
the image quality.
If necessary, adjust the image by referring to the
PTV manual supplied.
To Next Page
Loading...
