21
3.8. MOVING THE MACHINE
· When moving the machine, be sure to remove the plug from the power supply.
Moving the machine with the plug inserted can cause the power cord to be
damaged, resulting in a fire or electric shock.
· When moving the machine, retract the leg adjusters fully and ensure the casters
make contact with the floor. During movement pay careful attention so that the
casters or leg adjusters do not damage any other cabling laid on the floor. Such
damage could result in a fire or electric shock.
· Only QUALIFIED SERVICE PERSONNEL should carry out this operation.
· Do not handle the machine by its plastic parts as this may result in damage or injury.
To Next Page
Loading...
