4-37
Fuse box Replacement
To prevent an accidental short circuit, turn the ignition switch to the (OFF) position
and check or replace the fuse(s).
To check or replace the circuit fuse, pull out the old fuse with a puller.
The fuse box cover is equipped with a puller. Using this tool will help you take out
the fuse.
The fuse box cover is fitted with a common fuse which can be replaced.
1
Puller
2
Spare fuse
NOTICE
If a replacement fuse suitable for the circuit rating is not
available, install a lower rated fuse.
R1 Remote power-on relay 12V 20A
R2 IG1 relay 12V 20A
R3 Auxiliary start relay 12V 20A
R4 Main relay 12V 20A
R5 High light relay 12V 20A
R6 Low light relay 12V 20A
R7 Day light relay 12V 20A
R8 Fuel pump relay 12V 20A
R9 FAN relay 12V 20A
R10 2-4 Wheel drive relay 12V 20A
R11 4 Wheel drive lock relay 12V 20A
To Next Page
Loading...
