EasyManua.ls Logo

Segway Villain SX10 X - Break-In Guidelines

Segway Villain SX10 X
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-9
Avoid parking on an incline if possible. If it's unavoidable, follow these
precautions:
1. Stop the engine.
2. Place the transmission in PARK.
3. Lock the parking brake.
4. Always block the rear wheels on the downhill side.
Break-in Guidelines
The engine break-in period is 10 working hours or a 186mi(300Km). During break-
in:
Avoid full throttle operation.
Avoid pressing the accelerator pedal past ¾ down.
Avoid continuous acceleration.
The brake needs a 124mi(200Km) run-in period.
New brakes will not operate at their maximum efficiency until the break-in period is
over. Brake performance may be compromised if not followed.
NOTICE
During this period, avoid full-throttle running, rapid
acceleration, and constant rpm operation.

Table of Contents

Related product manuals