3-10
PRE-RIDE INSPECTION
Perform a pre-ride inspection before each ride to detect any potentials problem
that could occur during operation. The pre-ride inspection will help you monitor
component wear and deterioration before they become a problem.
Correct any problems that you discover to reduce the risk of a breakdown or
accident.
Inspection Items
Item Note Page
Brake system Ensure proper operation 4-17
Brake fluid Ensure appropriate level 4-18
Front suspension
Check and lubricate if
necessary
4-24
Rear suspension
Check and lubricate if
necessary
4-24
Tire Check status and pressure 4-19
Wheel/fastener
Check to ensure the
tightness of fasteners
4-20
Nut
、
bolt
、
fastener Check to make sure it's tight ——
Fuel Ensure appropriate level ——
Engine oil Ensure appropriate level 4-8
Coolant level Ensure appropriate level 4-18
Coolant pipe Check leakage ——
Throttle Ensure proper operation ——
Indicator/switch Ensure proper operation 2-3
Air intake prefilter Check ,clean 4-25
Front headlight Check operation 2-3
Brake light/taillight Check operation 2-3
Seat belt
Check the length of the
seat belt for damage and
check whether the latch is in
normal operation
2-9
Cab door
Inspect doors and latches
for wear or damage
2-10
To Next Page
Loading...
