3-16
Winch Operation
Manual Release switch of Winch
1
Manual release switch of Winch
• When the winch manual release switch is turned clockwise, the winch cable
can be pulled out manually.
• When the winch manual release is switched (turned counterclockwise), the
winch can be controlled by the switch.
Operation of control Switch
Remove the control switch from the passenger armrest storage and connect the
control switch to the power interface of the winch located at the front of the vehicle.
1. Open the waterproof cover of the power interface of the winch switch.
2. Insert the control switch wire into the power interface.
OUT
：
Release the winch cable IN
：
Recoil the winch cable
To Next Page
Loading...
