2-15
INSTRUMENT PANEL
The instrument panel provides the operator with the vehicle information, and the
driver should understand the meaning of the various indicators, warning lights and
display content information on the instrument table, to understand the vehicle
status.
NOTICE
The combination meter may be damaged by using a high
pressure cleaner. Do not clean the instrument with alcohol or
corrosive detergent. Corrosive liquid will corrode the surface
of the instrument and cause damage to the instrument.
Instrument Indicator Light/Warning Light
Indicator lights and warning lights on the instrument indicate the status of the
vehicle's systems. The figure below shows all the lights and warning lights.
The ignition lock switch is placed “ ON ” mode
，
switch on the meter.
1
The Engine Tachometer Shows
the vehicle's real-time speed.
。
0
→
2
→
4
→
6
→
8
→
10(From low to high)
2
The Speedometer
shows the vehicle's real - time speed.
3
Fuel Quantity Indicator
E
：
Fuel empty F
：
Fuel full
Shows the fuel level in the fuel tank. Activate the low fuel warning when the
last section is cleared. All segments including the fuel icon will flash and refuel
To Next Page
Loading...
