SEH EPS TSE Server 8 - Software Installation & Finding the IP Address

9 [en] Manual
 Software Installation & Finding the IP
Address
Depending on the hardware installation, the Fiscal Server then checks if it can
receive an IPv4 network configuration (IP address, subnet mask, gateway, DNS -
Domain Name Service) dynamically over DHCP (Dynamic Host Configuration
Protocol). If this is not the case, the Fiscal Server assigns itself an IP address via
Zeroconf from the address range (169.254.0.0/16) which is reserved for
Zeroconf.
The IPv4 address assigned to the Fiscal Server can be found in the SEH Product
Manager software tool.
The software is installed on all clients from which SEH Computertechnik GmbH
devices are to be administrated and managed on the network.
After starting, the SEH Product Manager scans the network for connected SEH
Computertechnik GmbH devices. All found devices are displayed in the 'device
list'. The IP address and other information can be seen.
You can also select and then administer and manage (
12) the devices in the
device list.
To use the SEH Product Manager, install the program on a computer with a
Windows or macOS operating system. The SEH Product Manager installer can
be found on the SEH Computertechnik GmbH website:
https://www.seh-technology.com/services/downloads/download-fiscal-
solutions/eps-tse-server-8.html
Windows
The installation file is available as '*.exe' for Windows systems.
 Windows 7 or higher
 The installation can only be carried out by users with administrative rights.
1. Start the SEH Product Manager installer.
2. Follow the installation routine.
 The SEH Product Manager is installed on your client.
macOS:
The installation file is available as '*.pkg' for macOS systems.
 macOS 10.12.x or higher
 The installation can only be carried out by users with administrative rights.
 You know the administrator password.
1. Start the SEH Product Manager installer.