Preliminary position of this
watch
The preliminary
position of the date is “1” (1st).
The preliminary position of the multi-function
indicator hand is a charging status display of
“low.”
The preliminary position of the hour/minute
hands is “12:00 AM”.
The preliminary position for the sub-dial and
the AM/PM hand is “12:00 AM”.
The preliminary position of the stopwatch 1/20-
second hand is 0.00 seconds.
1
Pull out the crown to the second
click
The seconds hand moves to display the sub-dial of the
currently set time zone.
Pull out
the crown to
the second
click
2
Continue to press Button B
(3 seconds)
The watch enters the mode to adjust the preliminary
position of the sub-dial.
Press for
3 seconds
The seconds hand stops at the 36-second position.
The sub-dial and the AM/PM hand turn and stop to
indicate the preliminary position.
3
Turn the crown to adjust the sub-dial
and AM/PM hand to “12:00 AM”
* When the sub-dial and AM/PM hand are “12:00 AM”,
go to operation D.
Turn the crown clockwise to
advance 1 step.
Turn the crown
counterclockwise to
set back
1 step.
Turn quickly to move
continuously.
Turn again to stop
moving.
At this time, the sub-dial and AM/PM hand move along
together.
Correctly adjust them to “12:00 AM”.
Setting the preliminary position of the sub-dial, stopwatch 1/20-second hand, multi-function indicator hand,
date, and hour/minute hands
52
7
TROUBLESHOOTING
5X83 GPS SOLAR
To Next Page
Loading...
