Sekonic SR-430 - 10-M Other Commands

-49-
10-M OtherCommands
-1 ENQCommand(ErrorStatusOutputCommand)
[Explanation]
Thiscommandisforoutputtingthestatusaftercardfeeding.
Thedataareof1-bytefixedlengthASCIIcodes.
SeparatorslikeSTXandETXcanbeaddedusingtheDC4command.
[Format]
HostComputer Thisdevice
ENQ CR Receive
(05H) (0DH)
Receive Dataoutput
#
Errorstatus
Forerrorstatuses,see8-B-2.
10.DataTransferMode