Date Code 20131015 SEL-735 Quick-Start Guide
Quick-Start Guide
I. Introduction
This Quick-Start Guide explains how to
install, configure, test, and operate the
SEL-735 Power Quality and Revenue
Meter. For detailed information on these
topics, please refer to the SEL-735 Power
Quality and Revenue Meter Instruction
Manual located at www.selinc.com.
II. SEL-735 Overview
This section outlines essential installation information, including front-panel layout, rear-panel layout, labels, and
dimensions.
A. Front-Panel Layout
The front-panel interface consists of programmable pushbuttons and LEDs, an LCD, a keypad, a test mode LED,
and an optical communications port.
Figure 1 Front-Panel Layout
Optical port,
communications
and test mode LED
Programmable
local-control button
Potential LEDs
Programmable LEDs
Programmable LCD
Programmable
control
pushbuttons
Enable LED
TEST LED
Menu pushbuttons
for settings
SEL-735 Power Quality and Revenue Meter
To Next Page
Need help?
General