EasyManua.ls Logo

Selta NETfon 330 - Safety Declaration; Environmental Impacts and End Life Disposal

Selta NETfon 330
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety declaration
NETfon 330 - User Guide 723142013-A0-LM
35
5. Safety declaration
If the phone is powered directly from the LAN connector (Power over Ethernet) the power sourcing
equipment shall conform to the standard IEEE 802.3af and classified as a Limited Power Source in
accordance with IEC 60950-1:2001.
6. Environmental impacts and end life disposal
The product, at the end of its life-cycle must not be disposed of in the environment; its disposal must
occur according to article 13 of the Law Decree 25th July 2005, n. 151 “Implementation of the directive
2002/95/CE, 2002/96/CE and 2003/108/CE, relative to the reduction in the use of dangerous
substances in electrical and electronic equipment, as well as the disposal of refuse”.
The crossed refuse bin symbol shown on the equipment or on its packing and also in the following
figure, indicates that the product at the end of its useful life must be collected separately from other
refuse.
The differential collection of this equipment when it has reached the end of its life-cycle is organized
and managed by the supplier. The user that wants to dispose of this equipment must contact the
supplier and follow the method that they have adopted for the separated collection of the equipment
that has reached the end of its life-cycle.
A suitable separated collection to start off the process of equipment recycling, its treatment and a
compatible environmental disposal helps to avoid possible negative effects on the environment and on
health, and encourages the reuse and/or recycle of the materials forming the equipment.
The abusive disposal of the product by the owner brings the application of administrative sanctions
defined by the laws in force.

Table of Contents

Related product manuals