User operations
NETfon 330 - User Guide 723142013-A0-LM
44
8.1.9. Automatic enblock
Blocking the dialling of a call, gives the user the possibility to dial the phone numbers, display the digits and
decide when to proceed to make the call by pressing menu/enter key or by lifting the handset.
Automatic enblock is indicated by the presence of the icon ( ) on the stand-by screen of the phone.
The automatic enblock requires the "automatic hands-free" set and works only with the handset on hook.
Activate/Deactivate Automatic enblock in the following way:
1. press menu/enter button
2. scroll the menu up to USER SETTINGS
3. press menu/enter
4. scroll the menu up to AUTOMATIC ENBLOCK
5. with UP and DOWN arrows select ACTIVE/NOT ACTIVE
6. to confirm press menu/enter
7. to exit the menu press ESC
8. <Save the changes?> to save press menu/enter , to cancel press ESC .
8.1.10. Login-Logout
NETfon can be enabled to login/logout service, a user can login providing username (= telephone number)
and password (= user's password) and using it with his "profile" (including the phone book and class of
service); after using, user logs out.
Login to SAMIP system from a charge phone, in the following way:
1. press menu/enter button
2. scroll the menu up to USER SETTINGS
3. press menu/enter
4. scroll the menu up to LOGIN-LOGOUT
5. with UP and DOWN arrows select LOGIN
6. to confirm press menu/enter
7. enter your telephone number and confirm
8. enter your password and confirm
9. wait for connection. If the procedure is successful the display shows on the screen your phone number
and your class of service, then the phone is ready to be used by the new user, otherwise, or the
question “Data read not possible, continue?” appears, please contact your system administrator
Logout in the following way:
1. press menu/enter button
2. scroll the menu up to USER SETTINGS
3. press menu/enter
4. scroll the menu up to LOGIN-LOGOUT
5. with UP and DOWN arrows select LOGOUT
6. press menu/enter
7. wait for disconnection. If the procedure is successful the display shows on the screen the previous
phone number; otherwise, or the question “Data save not possible, continue?” appears, please contact
your system administrator
To Next Page
Loading...
