User operations
NETfon 330 - User Guide 723142013-A0-LM
43
8.1.6. Customizing the language
Change the language of the screen in the following way:
1. press menu/enter button
2. scroll the menu up to USER SETTINGS
3. press menu/enter
4. scroll the menu up to LANGUAGE
5. the language in use is displayed, to choose the new language scroll the list
6. to confirm press menu/enter
7. to exit the menu press ESC
8. <Save the changes?> to save press menu/enter , to cancel press ESC .
8.1.7. Customizing call ring pattern
Change the ring pattern (flash-only, ring once, beep-only, etc.) in the following way:
1. press menu/enter button
2. scroll the menu up to PROFILES
3. press menu/enter
4. choose one of the three options GENERAL - MEETING - SILENT (*)
5. to confirm press menu/enter
6. to exit the menu press ESC or wait until the timer elapses
(*)
General
It is the default ring pattern and does not change the ring set up by the user.
Meeting
It makes the ringer last only 2 seconds.
Silent
The ringer is off, the incoming call is signalled by the led flashing blue.
8.1.8. Adjusting handset, headset, speakerphone and ringer volume
Adjust the volume in the following way:
1. press menu/enter button
2. scroll the menu up to USER SETTINGS
3. press menu/enter
4. choose one of the options: HANDSET VOLUME / SPEAKER VOLUME / RINGER VOLUME /
HEADSET VOLUME
5. press menu/enter
6. the screen displays a status bar with the actual value, to make adjustment press UP or DOWN
arrows
7. to confirm press menu/enter
8. to exit the menu press ESC
9. <Save the changes?> to save press menu/enter , to cancel press ESC .
To Next Page
Loading...
