The device, may be cleaned by following the instructions below:
• Use clean, soft cloth along with mild detergent to wash the dirt off.
• Do not use high pressure water. Pour water gently from the top and use a wet/dry cloth to clean all
the sides.
• Never use strong detergents or any other chemicals (Acids, petrol, thinner or any other solvent.)
• Do not exert too much of pressure on the device while cleaning.
• Do not open the device.
• Do not use a vacuum cleaner.
Power Up!
• To power up, flip the breakers.
• Call (800)-663-5633 to complete installation.
• Please have the station serial number ready with you. If you do not have it, you can find it on left-hand
side of the station.
Installation Manuals Series 6 EV Charging Station - 1
Copyright ©2021 SemaConnect, Inc. All rights reserved. Page 18 of 25
To Next Page
Loading...
