Sena 3S PLUS - Second Mobile Phone Pairing; GPS Pairing

3S PLUS
12
3. Search for Bluetooth devices on your mobile phone. Select Sena
3S PLUS in the list of devices detected.
4. If your mobile phone asks for a PIN, enter 0000.
Note:
• The phone pairing mode lasts for 3 minutes.
• To cancel pairing, tap the (+) Button or (-) Button.
4.1.2 Pairing When the Headset Is Turned Off
1. While the headset is turned off, press and hold the (+) Button and
(-) Button for 5 seconds.
2. You will hear a voice prompt, “Phone pairing”.
3. Search for Bluetooth devices on your mobile phone. Select Sena
3S PLUS in the list of devices detected.
4. If your mobile phone asks for a PIN, enter 0000.
4.1.3 Pairing When the Headset Is Turned On
1. While the headset is turned on, press and hold the (+) Button for
5 seconds.
2. You will hear a voice prompt, “Phone pairing”.
3. Search for Bluetooth devices on your mobile phone. Select Sena
3S PLUS in the list of devices detected.
4. If your mobile phone asks for a PIN, enter 0000.
4.2 Second Mobile Phone Pairing - Second Mobile
Phone and SR10
1. To enter the conguration menu, press and hold the (+) Button for
10 seconds until you hear a voice prompt, “Conguration
menu”.
2. Tap the (+) Button until you hear a voice prompt, “Second mobile
phone pairing”.
3. Search for Bluetooth devices on your mobile phone. Select Sena
3S PLUS in the list of devices detected.
4. If your mobile phone asks for a PIN, enter 0000.
4.3 GPS Pairing
1. To enter the conguration menu, press and hold the (+) Button for
10 seconds until you hear a voice prompt, “Conguration
menu”.
2. Tap the (+) Button until you hear a voice prompt, “GPS pairing”.
3. Search for Bluetooth devices on the GPS navigation screen. Select
Sena 3S PLUS in the list of devices detected.
4. If your mobile phone asks for a PIN, enter 0000.
Note: If you have a mobile phone and a GPS connected to your headset, you
may not be able to listen to the GPS voice instruction during the phone call.