Sena 3S PLUS - INSTALLING THE HEADSET ON YOUR HELMET; Boom Microphone Type

3S PLUS
6
2 INSTALLING THE HEADSET ON YOUR
HELMET
2.1 Boom Microphone Type
1. Peel off the hook fasteners for the speakers and attach them on
the back sides of the speakers.
2. Attach the loop fasteners for the speakers in the deep ear pockets
of your helmet. Then place the speakers in the helmet along with
the hook and loop fasteners, centered to your ear.
Note: Locate the boom microphone as closely as possible to your mouth when
wearing the helmet.
3. Hide the wire under the helmet padding after the installation.