3S PLUS
7
English
2.2 Universal Microphone Type
1. Peel off the hook fasteners for the speakers and attach them on
the back sides of the speakers.
2. Attach the loop fasteners for the speakers in the deep ear pockets
of your helmet. Then place the speakers in the helmet along with
the hook and loop fasteners, centered to your ear.
3. Locate a suitable surface on the left side of your helmet to attach
the unit, clean the location with a moistened towel, and allow to
dry thoroughly. Make sure that the control unit sticks on the helmet
rmly. Maximum adhesion occurs after 24 hours.
To Next Page
Loading...
