Sena 3S PLUS - Voice Prompts (Default: Enable); Advanced Noise Control (Default: Enable); FIRMWARE UPGRADE

3S PLUS
18
10.2.5 Voice Prompts (Default: Enable)
You can disable voice prompts by software conguration settings,
but the following voice prompts are always on.
– Headset conguration settings menu
10.2.6 Advanced Noise Control™ (Default: Enable)
When Advanced Noise Control is enabled, the background noise is
reduced during an intercom conversation. When it is disabled, the
background noise is mixed with your voice during intercom.
11 FIRMWARE UPGRADE
The headset supports rmware upgrades. You can update rmware
using the Sena Device Manager. Please visit Sena Bluetooth website
at www.sena.com to check the latest software downloads.