Sena ECONO - Removing the Helmet; Removing Shield Visor

10
ABOUT THE ECONO BLUETOOTH HELMET
1.4.2 Removing the Helmet
1. Fasten the chinstrap by using the retention system.
2. Gently pull the padded chinstrap outward and slide
the helmet off your head.
Note: Fastening the chinstrap after removing the
helmet will help avoid scratching surfaces it’s placed
upon.
Quick-release retention system
1
2
Chinstrap One-touch Bracket
Strap Ladder
1.4.3 Removing Shield Visor
1
2
1. Open a shield visor to fully opened position.
2. Pull the trigger down and pull out the shield visor at
the same time.
3. Repeat the process on the other side.