Sena ECONO - Checking the Battery Level; Volume Adjustment; Downloadable Sena Software; Sena Device Manager

17
GETTING STARTED: BLUETOOTH SYSTEM
2.3 Checking the Battery Level
When the headset is powering on, the red LED flashes
rapidly indicating the battery level.
4 flashes = High, 70 ~ 100%
3 flashes = Medium, 30 ~ 70%
2 flashes = Low, 0 ~ 30%
2.4 Volume Adjustment
You can raise or lower the volume by rotating the Jog
dial. Volume is set and maintained independently
at different levels for each audio source (i.e. phone,
intercom), even when the Bluetooth system is rebooted.
•
Volume up/down
Rotate the Jog dial clockwise or counterclockwise.
2.5 Downloadable Sena Software
2.5.1 Sena Device Manager
The Sena Device Manager allows you to upgrade
the firmware and configure its settings directly from
your PC or Apple computer. For more information on
downloading the Sena Device Manager, please visit
sena.com.