15
GETTING STARTED: BLUETOOTH SYSTEM
2. To test the chinstrap tension, slip your index finger
under the chinstrap and pull. If the chinstrap is
loose under the chin, it needs to be tightened. If the
chinstrap loosens when you pull on it, the helmet is
not properly fitted. Undo the chinstrap completely
and try fastening it again, then repeat the test.
3. If you are unable to fasten the chinstrap so that it fits
firmly against the chin, check that your helmet is still
the right size for you.
Note: Repeat the test after each adjustment.
CAUTION: Never ride with the chinstrap
unfastened or incorrectly adjusted. The chinstrap
should fit correctly and should not become loose
when pulled. The fastener is not correctly closed if
the chinstrap becomes loose when pulled.
2. GETTING STARTED:
BLUETOOTH SYSTEM
2.1
Powering On and Off
•
Power On
Rotate while pressing the Jog dial clockwise for
1 second.
•
Power Off
Press and hold the Jog dial for 5 seconds.
To Next Page
Loading...
