Sena ECONO - Charging

16
GETTING STARTED: BLUETOOTH SYSTEM
2.2 Charging
The Bluetooth system can be charged using many
common methods via the supplied USB power & data
cable: the Econo is compatible with 5 V input USB-
charged devices only.
Depending upon the charging method, the Bluetooth
system will be fully charged in about 3 hours.
Note:
•
Please make sure to take off your helmet while
charging. The Bluetooth system automatically turns
off during charging.
•
Any 3rd party USB charger can be used with Sena
products if the charger is approved by either the
FCC, CE, IC or other locally approved agencies that
Sena accepts.