Sena SFR - Configuration Settings; Headset Configuration Menu Access

SFR
25
English
13 CONFIGURATION SETTING
13.1 Headset Conguration Setting
1. To enter conguration menu, press and hold the Center Button for
10 seconds until you will also hear a voice prompt, “Conguration
menu”.
2. Tap the (+) Button or the (-) Button to navigate between the
menus. You will hear voice prompts for each menu item.
3. You can execute the command by tapping the Center Button.
Conguration Menu Tap Center Button
Phone Pairing None
Second Mobile Phone Pairing None
GPS Pairing None
Phone Selective Pairing None
Media Selective Pairing None
Conguration Menu Tap Center Button
Delete All Pairings Execute
Remote Control Pairing Execute
Universal Intercom Pairing Execute
Factory Reset Execute
Exit Conguration Execute
13.1.1 Remote Control Pairing
You can remotely control the headset using Sena Remote Control
devices (sold separately).
1. Turn on the headset and the Remote Control device.
2. Execute Remote Control Pairing.
3. Enter pairing mode in the Remote Control device. The headset will
automatically connect with the Remote Control device in pairing
mode.