Sena SFR - Headset Installation Guide; Installing the Main Unit on Helmet

SFR
8
2 INSTALLING THE HEADSET ON YOUR HELMET
2.1 Installing the Main Unit
2.1.1 Using the Hook and Loop Fasteners for Main Unit
1. Attach the hook fastener to the helmet and attach the loop fastener
to the back plate of the main unit.
2. Attach the main unit using the hook and loop fasteners that you
tted. Make sure that the main unit is rmly attached to the helmet.
1
2
2
2
2.1.2 Using the Double Sided Adhesive Tapes for Main Unit
1. Attach double sided adhesive tapes to the back plate of the main
unit.
2. Attach double sided adhesive tapes to the main unit on the left
side of your helmet.
3. Make sure that the main unit sticks on the helmet rmly. Maximum
adhesion occurs after 24 hours.
1
2
2
2