Sena SP38 - Assigning Speed Dial; Audio Multitasking

20S
47
English
21.3 Setting Intercom-audio Overlay Sensitivity
Voice Prompt
“Intercom-audio overlay sensitivity”
Factory Default 6
Level Adjustment Rotate the Jog Dial (1~10)
Apply Tap the Phone Button
When the Audio Multitasking setting is enabled, if you talk over the
intercom while music is playing, then the music volume will be lowered
to play in the background. You can adjust the intercom sensitivity
to activate this background music mode. To adjust this intercom
sensitivity, tap the Phone Button when you hear the voice prompt,
“Intercom-audio overlay sensitivity”. Rotate the Jog Dial to adjust
the sensitivity level. Level 1 has the lowest sensitivity and level 10
has the highest sensitivity. Tap the Phone Button to save the level of
sensitivity and you will hear the voice prompt “Save (#)”.
Before you conrm the selected level, you can test its sensitivity by
saying a word out loud or blowing into the mic. If your voice is larger
than the sensitivity of the selected level, you will hear double beeps. If
your voice is smaller than the sensitivity of the selected level, you will
not hear anything.
21.4 Enabling/Disabling Navigation App Support
Voice Prompt
“Navigation app support”
Factory Default Disable
Enable Tap the Phone Button
Disable Tap the Jog Dial
When Audio Multitasking is enabled, your smartphone’s GPS
application reduces in volume whenever there is an ongoing intercom
conversation. To listen to your smartphone’s GPS navigation clearly
without this volume reduction, enable Navigation App Support.
Note:
The volume level of the music will not be reduced during an intercom
conversation when the Navigation App Support setting is enabled.
21.5 Enabling/Disabling Audio Boost
Voice Prompt
“Audio boost”
Factory Default Disable
Enable Tap the Phone Button
Disable Tap the Jog Dial
Audio Boost increases the overall maximum volume. Disabling Audio
Boost will reduce the overall maximum volume.