Sena SP38 - FM Station Guide; Sidetone; Advanced Noise Control

20S
52
21.15 Delete All Bluetooth Pairing Information
Voice Prompt
“Delete all pairings”
Factory Default N/A
Execute Tap the Phone Button
To delete all Bluetooth pairing information of the 20S, rotate the Jog
Dial until you hear a voice prompt saying “Delete all pairings”, and
tap the Phone Button to conrm. Tapping the Jog Dial is not available
for this setting.
21.16 Remote Control Pairing
Voice Prompt
“Remote control pairing”
Factory Default N/A
Execute Tap the Phone Button
To enter into Remote Control Pairing mode, rotate the Jog Dial until
you hear a voice prompt, “Remote control pairing”. Then press the
Phone Button to enter into Remote Control Pairing mode. The headset
will automatically exit from the conguration menu. Please refer to
section 19 for details on remote control.
21.17 Universal Intercom Pairing
Voice Prompt
“Universal intercom pairing”
Factory Default N/A
Execute Tap the Phone Button
To enter into Universal Intercom Pairing mode, rotate the Jog Dial until
you hear a voice prompt, “Universal intercom pairing”. Then press
the Phone Button to enter into Universal Intercom Pairing mode. The
headset will automatically exit from the conguration menu. Please
refer to section 18.1 for details on Universal Intercom.
21.18 Exit Voice Conguration Menu
Voice Prompt
“Exit conguration”
Factory Default N/A
Execute Tap the Phone Button
To exit voice conguration menu and get back to stand-by mode,
rotate the Jog Dial until you hear a voice prompt saying “Exit
conguration”, and tap the Phone Button to conrm. Tapping the Jog
Dial is not available for this setting.